What to Do If You Have a Blocked Drain

Gaelde Meyere  » Guide »  What to Do If You Have a Blocked Drain

What to Do If You Have a Blocked Drain

0 Comments

The first step when you have a blocked drain is to find out what caused the blockage. This can be hard to determine especially if you don’t have the necessary tools to do so. To diagnose the problem, you can use leak detection equipment. Look for think about Thousand Oaks plumbing and water staining on the ceiling to identify the cause. Once you’ve found out what caused the blockage, you can take the necessary steps to fix the blockage.
Unblocking a blocked drain


If you have a blocked drain, there are several ways to unblock it. These methods might work in some situations, but they can also damage pipes and injure someone if done incorrectly. To get a clean drain, contact a plumber. Plumbers are professionals who know more about the causes of blockages.

Blockages can be caused by debris, buildup, or root intrusion. Regardless of the cause, a regular drain cleaning routine will help prevent recurring blockages and keep your pipes healthy. CCTV drain surveys are also a great option to help you determine the cause of your blocked drain.

Another way to unblock a drain is by using a rubber plunger. Insert the plunger in the drain area and push it up and down a few times. The water should then flow normally.
Cleaning it with baking soda and vinegar

Baking soda and vinegar are two of the best ingredients to use for cleaning a blocked drain. This mixture fizzes for up to 10 minutes, and you can use it over again to get rid of stubborn clogs. If you don’t have any vinegar or baking soda in your home, you can try boiling water. These two ingredients can be found in many household cleaners and disinfectants, as well as toilet bowl cleaners and oven cleaners. There are even green cleaning recipes you can make with these two ingredients.

To use this solution, boil half a gallon of water. This will soften any greasy, oily, or soap residue that may be clogging your drain. Pour the mixture into the drain. Make sure you squeeze out the excess water from the baking soda so that it does not settle at the bottom of the drain. When you pour the mixture down, remember to use your hands to push it down the drain, as it may turn to mush if it gets wet. Also, keep in mind that baking soda and vinegar react with each other, so if you pour the mixture into the drain without swishing it around, it will not work.

Baking soda and vinegar are inexpensive and easy to use, and they work well to clean a drain. You can also use boiling water if you don’t have a bucket of water on hand. Candu Plumbing & Rooter said of baking soda and vinegar works best when they are mixed in a 1:1 ratio, but you can adjust this ratio to get the best results.
Using a drain snake

A drain snake is an effective way to clear a clogged drain. However, you must be careful when using it because it can damage your pipes. Always use it with a drain snake head attached to it. The length of the snake head should not exceed the diameter of the pipe.

The handle of the drain snake should be turned clockwise in order to grind away the blockage. This rotation action will cause the tip to grab on to the clog and chop away at it. It should also be able to navigate bends in the pipe. This will make the process easier.

Before using a drain snake to clear a blocked pipe, you must first determine the exact location of the clog. If the drain is located under a sink, debris may be blocking it. This type of clog can be cleared using a drain snake, but if it has a deeper and more stubborn blockage, it is best to call a plumber.
Using salt to unclog a blocked drain

One of the best ways to unclog a blocked drain is to use a mixture of baking soda and salt. This combination contains both abrasive and antibacterial properties and can clear up the toughest blockages. To use this mixture, simply heat the mixture to almost boiling point and pour it down the drain. Repeat https://www.canduplumbing.com/plumbing-services/24-hour-plumber/ and then flush the drain with cool water.

The grainy nature of salt helps it scrape away the buildup of debris from blocked drains. When mixed with hot water, it will dissolve grease and soap residue, which will clear the blockage. After pouring the salt solution down the drain, rinse it off with cool water to eliminate any risk of damaging the pipes.

A teaspoon of table salt mixed with four liters of water can be used to unclog a drain. The solution has the advantage of being cheap and easily available. It can also be combined with other products to unclog a drain. Baking soda and salt can also be combined to unclog a stubborn toilet. To use this solution, simply pour the mixture into the toilet bowl, stirring it up until the mixture dissolves completely. You should allow the mixture to soak for at least 15 minutes before flushing it out. However, if the clog is stubborn, you may want to leave it for up to 30 minutes.


Candu Plumbing & Rooter
22144 Eccles St, Canoga Park, CA 91304
(855) 522-2638
https://www.canduplumbing.com/